CRIUS AIOP V2.0 ALL IN ONE PRO Flight Controller

CRIUS AIOP V2.0 ALL IN ONE PRO Flight Controller

Mensagempor Soaron » 11 set 2013, 18:01

Hardware Features:
·Supported MegaPirateNG /ArduCopterNG/ArduPlaneNG/MultiWii firmware
·8-axis motor output and 3 servos output for gimbal system
·8 input channels for standard receiver and PPM SUM input channel
·4 serial ports for debug/Bluetooth/OSD/GPS/telemetry module
·8 Analog port for Airspeed Sensor/Current & Voltage Sensor/LED controller
·User-defined pads D32~37 & PG1~PG5
·I2C 5V port for external device
·Output/USB ports provided over current protection
·Reverse polarity protection for input power
·Select jumper for choose internal or external magnetometer
·Onboard 16Mbit Dataflash chip for automatic datalogging
·ATMega 2560-16AU Microcontroller
·MPU6050 6-axis gyro/accel with Motion Processing Unit
·HMC5883L 3-axis digital magnetometer
·MS5611-01BA03 highprecision altimeter with metal cap
·FT232RQ USB-UART chip and Micro USB receptacle for uploading firmware and debug
·PCA9306DP1 logic level converter for I2C
·Match the standard of RoHS

Input power selection
·One of the following way
- Connect 5V power cable from ESC or UBEC to ESC/Servo port, the J1 jumper must be closed.
- Connect 5V power cable to the external power port, the J1 jumper must be removed.

·Dimension: 50mmX50mmX11.6mm
·Weight: 14.5g
·Fixing hole spacing: 45mm
·Hole diameter: 3.1mm

Package content
·ALL IN ONE PRO Flight Controller x 1
·3Pin to 1Pinx3 cable 100mm x 3
·3Pin to 3Pin cable 100mm x 1
·Molex 1.25mm 4Pin cable 100mm x1
·Molex 1.25mm 6Pin cable 100mm x1
·Molex 1.25mm 8Pin cable 100mm x2

Não tem Permissão para ver os Ficheiros anexados nesta Mensagem.
Avatar do Utilizador
Membro com baixo nível de participação
Mensagens: 11
Registado: 25 fev 2010, 19:38

Voltar para Helicopteros

Quem está ligado:

Utilizador a ver este Fórum: Nenhum utilizador registado e 1 visitante